''Maxicote was voted number one emulsion paint in performance and sales in Cyprus, according to a market research made to the professionals in April 2006''

CHARACTERISTICS: High quality washable paint for interior and exterior use. Can be applied on plaster, cement blocks, drywall, masonry, stone and wood surfaces.

TECHNICAL CHARACTERISTICS
Vehicle Type: Va VeoVa copolymer
Specific Gravity: 1.30-1.40
Volume Solids: 39-43
Weight Solids: 54-58
Viscosity: 108-115 KU'S
Finish: 0-5 units @ 85^o
Flash Point: not applicable
Storage Conditions: In a dry place, away from direct sunlight and extreme temperature.
Shelf life: not applicable

APPLICATION
Thinning / Cleaning: Tap water
% Reduction - Prime Coats: Upto 30%
% Reduction - Finish Coats: Upto 10%
Thickness (recommended): wet - 4 mils, dry - 1.6 mils (40μm) per coat.
Application Tools: Brush, Roller, Spray - airless (pressure 2000psi, Tip 0.017'' - 0.021'').
Coverage (recommended): 13 - 16 m² /L/coat
Drying time @ 25^oC and 50% RH: Touch 1 hour, recoat 4 hours
Temperature during application: 5-35^oC

SURFACE PREPARATION
1.   Remove all surface contamination e.g. dust, oil stains by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Peeling or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull.
2.   All masonry, concrete, cement and block surfaces must be cured for a least three weeks before painting. Surface pH should be between 7-9.
3. Surfaces should be dry before painting.
4. Porous surfaces should be primed with Masonry Conditioner or Ecoprimer (Peletico products) before painting.
PACKING: 1L, 2.5L, 5L, 10L, 20L

CAUTIONS
1. Avoid direct sunlight and high temperature during storage.
2. Keep away from children.
3. In case of eye contamination flush with large amounts of water and seek medical advice.
4. If swallowed get medical attention immediately, showing the tin.
5. Apply in well ventilated spaces.

NOTE: The information supplied in our literature or given by our employees, agents or distributors concerning the use of our products is based on extensive experience and given in good faith in order to help you. We guarantee the consistent high quality of our products. However, as we have no control over site conditions or the execution of the work, we cannot accept any liability for any loss or damage which may arise as a result thereof.

book this

Email a friend

next >