Ronseal Paint & Grain

Paint & Grain

Ronseal Paint &am= p; Grain is a quick and easy way of transforming virtually any interior surface into an attractive grain effect. There's no messy stripping back when prepa= ring surfaces and anyone can achieve an attractive grained finish.

<= /o:p>

Colours Available:

· <= /o:p>

Limed Oak<= /span>

· <= /o:p>

Limed Maple

· <= /o:p>

Beech

· <= /o:p>

Pine

· <= /o:p>

Antique Pine

· = <= /o:p>

Deep Mahogany

· <= /o:p>

Ivory

· <= /o:p>

Rustic Oak=

WHERE CAN I USE IT

Ronseal Paint = and Grain is suitable for use on most interior surfaces such as wood, paint, plastic, plaster, MDF, chipboard and melamine. Ronseal Paint and Grain is i= deal for kitchen units, bedroom furniture, bathroom fittings, cabinets and cupboards, painted radiators, occasional tables and many other items.<= /o:p>

WHAT SORT OF FINISH

A natural wood grain finish in a range of colours

HOW MANY COATS

2 coats of Ron= seal Clear Quick Drying Varnish over the paint are recommended to ensure maximum protection

COVERAGE

Up to 24m² per litre per coat. Coverage varies significantly with the absorbency and t= ype of surface being treated.

DRYING TIMES

Ronseal Paint = and Grain is touch dry in 30 minutes recoat after 4 = hours. Drying times may vary with temperature, relative humidity and absorbency of substrate.

APPLICATION

Ronseal Paint and Grain should only be applied to surfaces which are cl= ean, dry and free from traces of grease, oil and waxes, otherwise adhesion will = be reduced. Wipe the surface to be treated with white spirit, remove any loose coatings and rub down thoroughly with a medium grade abrasive paper. Wipe o= ver with a damp cloth to remove any dust and allow to dry. Detach the comb from= the graining tool before use. The comb has two edges, a wide edge for combing o= ver large surface, e.g. flush doors, and a narrow edge for combing over narrow = surfaces e.g. recesses in doors, mouldings on skirting boards, dado rails, beading a= nd curved surfaces, etc. Assemble the graining tool following the illustration= s on the pack leaflet. Stir the Basecoat thoroughly. Apply two coats allowing 4 hours between coats. Brush out in the direction you wish to grain. Do not attempt to try to achieve a perfect finish at this stage. Ensure that the Basecoat has dried for at least 4 hours. Stir the Graincoat thoroughly. App= ly one coat of Graincoat sparingly, brushing out in one direction. Work quickly ignoring brush marks. Whilst the Graincoat is still wet comb over the surfa= ce with the comb in one direction. Repeat until the whole area is lined. Ignore any overlapping. Hold the graining tool at approximately 45° to the sur= face and draw the graining tool along the wet lined surface in the direction of = the lines. Slightly rock the tool at approximately 12"-18" intervals,= or as often as required. Use a continuous motion and do not stop as you rock t= he graining tool. Each rocking motion produces a "knot". Repeat unti= l all the surface is sufficiently grained. Changes to the effect can be corrected by brushing out the effect with a little more Grain= coat and repeating the lining and graining procedure. Allow the surface to dry f= or at least 4 hours, but preferably overnight, then overcoat with Ronseal Quick Drying Varnish. Ronseal Quick Drying Clear Matt Varnish is particularly recommended for sealing Ronseal Paint and Grain treated surfaces.

CLEAN UP AND MAINTENANCE

Wash brushes and equipment immediately after use in warm water and detergent. Remove as much product as possible from tools and equipment prio= r to cleaning. Do not empty into drains or watercourses. Some local authorities = have special facilities for disposing of waste coatings.

&n= bsp;